Right Click & Save As

 

 

 

SPECIFICATIONS

 QUICK CHANGE SEALS
  CHECK VALVE
  MATERIAL CONTROL GATE 
  SHREDDER SIGHT GLASS
  TAKE-UP BOLTS ON BLOWER AND ENGINE
  #50 CHAIN & SPROCKETS
  DRIVE TIGHTNERS

  WEIGHT LOADED AIR PRESSURE CONTROL
  HANDY WORK SHELF
  2 SHAFT FINGER TYPE SHREDDER
  REMOVABLE SHREDDER PANEL 

PTO, Electric, Diesel or Gasoline
    Water Cooled Power Options.
  Blow through feeder, 12" x 16"
  Quick Change Seals
   2 Electric Clutches
   Positive Displacement Blower
   Feeder Outlet 3 1/2"
   Weight 1,400 Lbs.   

Blowing Rates For Model-100
Blows approx. 1,375 pounds of Fiberglass an hour.   
Blows approx. 3,300 pounds of Cellulose an hour.  
Blows approx. 2,200 pounds of Rockwool an hour. 
OPERATING PRINCIPALS OF CAPITOL INSULATION BLOWING MACHINES

Capitol Insulation Blowing Machines are pneumatic (air) conveying devices that also condition Insulation Fibers.

 

Material is fed into the hopper in compact form.  The auger preconditions material and feeds it through the material control gate into the shredders where the material is literally torn apart.  

 

Material then flows from the shredders into the air lock feeder.  The air lock feeder contains sealed vanes that rotate inside the feeder; therefore, allowing material to be in a constant air stream without air blowing back up into the hopper.  Material and air now travel through the hose where it is further conditioned by air bouncing the material against the hose walls causing the insulation to open to its desired density.  

 

Material should always be blown out and allowed to fall in place without bouncing off objects and without placing hands over the end of the hose.

 

WARRANTY

Capitol Insulation Machine Co., LLC. warrants its manufactured components to be free of defects in material and workmanship for a period of 1 year from the date of original purchase.

 

Warranty is limited to replacement or repair of parts, freight pre-paid to Capitol Insulation Machine Co., LLC.  Warranty does not apply to seals.  Engine warranty provided by engine manufacturer.

 

There is no warranty regarding fitness of purpose or performance. Warranty shall be void if alterations are made to machine.  Capitol Insulation Machine Co., LLC. does not assume liability or responsibility for any consequential damage or loss.

 

The above warranty is in lieu of all other warranties, expressed or implied.